No products in the cart.
-
Keysight Y1740A/100 Test Cable Assembly, 3.5 mm (m) to 3.5 mm (m), 26.5 GHz, 36″, Y1740A Series
Keysight Y1740A/100 Test Cable Assembly: 3.5mm (m) to 3.5mm (m), 26.5 GHz, 36″, Y1740A Series
$758.00 -
Rohde & Schwarz ZNH26: Unparalleled Vector Network Analysis from 30 kHz to 26.5 GHz
Rohde & Schwarz ZNH26 Handheld Vector Network Analyzer: 2-port, 30 kHz – 26.5 GHz, ZN-H Series, featuring advanced analysis capabilities, high accuracy, and portability for on-site testing and troubleshooting.
$46,645.00 -
Rohde & Schwarz ZN-Z52: Precision Calibration for 50 Ohm Systems, 100 KHz – 26.5 GHz
Rohde & Schwarz ZN-Z52 Calibration Unit: 50 Ohm impedance, 100 kHz – 26.5 GHz frequency range, 4-port design with 3.5 mm (f) connectors, ideal for accurate calibration of network analyzers and other RF test equipment.
$20,545.00 -
Rohde & Schwarz ZN-Z135: Ultimate 26.5 GHz Calibration Kit for Precision Measurements
Rohde & Schwarz ZN-Z135 Calibration Kit: 50 Ohm, 3.5mm(f), 26.5 GHz, Open/Short/Match/Through, ZN-Z1xx Series
$2,191.00 -
Siglent SEM5032A: Precision Electronic Calibration Module for 100 kHz – 26.5 GHz
Siglent SEM5032A Electronic Calibration Module: Enhance Measurement Accuracy with Two 3.5mm Female Ports, Covering a Wide Frequency Range of 100 kHz to 26.5 GHz.
$3,309.00 -
Siglent SEM5034A: Precision Electronic Calibration Module for Enhanced Signal Integrity
Siglent SEM5034A Electronic Calibration Module: Enhance Measurement Accuracy with Four 3.5mm Female Ports, Covering a Wide Frequency Range of 100 kHz to 26.5 GHz.
$7,966.00 -
Keysight 346C/100 Noise Source: Unleash Precision Noise Generation from 10 MHz to 26.5 GHz
Keysight 346C/100 Noise Source: Enhance Signal Integrity with Precision Noise Generation from 10 MHz to 26.5 GHz
$3,467.00 -
Keysight 346C/H01: Unleash Precision Noise Generation from 10 MHz to 26.5 GHz
Keysight 346C/H01 Noise Source: Enhance Signal-to-Noise Ratio with Precision Noise Generation from 10 MHz to 26.5 GHz
$4,267.00 -
Keysight R347B R-Band Noise Source: Unleash Precision Noise Generation from 26.5 GHz to 40 GHz
Keysight R347B R-Band Noise Source: Generate accurate and repeatable noise power from 26.5 GHz to 40 GHz for noise figure and gain measurements in radar, satellite communications, and other high-frequency applications.
$4,380.00 -
Keysight N4002A SNS Series Noise Source: Unleash Precision Noise Generation from 10 MHz to 26.5 GHz
Keysight N4002A SNS Series Noise Source: Enhance Signal-to-Noise Ratio with 10 MHz to 26.5 GHz Frequency Range and 15 dB ENR
$4,408.00 -
Keysight 346C/H06: Unleash Precision Noise Generation from 10 MHz to 26.5 GHz
Keysight 346C/H06 Noise Source: Enhance Signal-to-Noise Ratio with Precision Noise Generation from 10 MHz to 26.5 GHz
$5,255.00 -
Keysight N9355C Power Limiter: Protect Your Circuits with Precision
Keysight N9355C Power Limiter: Protect sensitive devices from power surges with this 26.5 GHz, 50 Ohm, 1W limiter featuring a 3.5 mm connector, part of the N9355/6 Series.
$961.00 -
Keysight 87300C: High-Performance Broadband Coaxial Directional Coupler for Precise Signal Monitoring
Keysight 87300C Broadband Coaxial Directional Coupler: Measure RF signals accurately with this 1 GHz to 26.5 GHz coupler featuring a 3.5-mm (f) connector.
$1,552.00 -
Keysight 84907K: Precision Programmable Step Attenuator for Advanced RF Applications
Keysight 84907K/004/024 Programmable Step Attenuator: Control signal levels with precision using this 26.5 GHz, 70 dB attenuator featuring 10 dB steps.
$2,957.00 -
Keysight 84906K Programmable Step Attenuator: Precision Attenuation for High-Frequency Applications
Keysight 84906K Programmable Step Attenuator: Control signal levels with precision using this 26.5 GHz, 90 dB attenuator featuring 10 dB steps. Ideal for automated testing and signal conditioning applications.
$3,266.00 -
Rohde & Schwarz HF907OM: Ultimate Broadband Omnidirectional Antenna for 800 MHz – 26.5 GHz
Rohde & Schwarz HF907OM Broadband Omnidirectional Antenna: 800 MHz – 26.5 GHz, Vertically Polarized, Silver/Grey
$7,534.00$7,930.00 -
Rohde & Schwarz AC004R1: Omnidirectional Antenna for 18-26.5 GHz Applications
Rohde & Schwarz AC004R1 Omnidirectional Antenna: Circular Right-Hand Polarization, 18GHz-26.5GHz, K-female
$9,231.00$9,717.00 -
Rohde & Schwarz AC004L1: Omnidirectional Antenna for 18-26.5 GHz with Circular Left-Hand Polarization
Rohde Schwarz AC004L1 Omnidirectional Antenna: Circular Left-Hand Polarization, 18 GHz – 26.5 GHz, K-female
$9,231.00$9,717.00 -
Rohde & Schwarz AC004R2: Omnidirectional Antenna for 26.5-40 GHz Applications
Rohde Schwarz AC004R2 Omnidirectional Antenna: 26.5 GHz – 40 GHz, K-female, Circular Right-Hand Polarization
$9,193.00$9,677.00 -
Rohde & Schwarz AC004L2: Omnidirectional Antenna for 26.5-40 GHz Applications
Rohde Schwarz AC004L2 Omnidirectional Antenna: Circular Left-Hand Polarization, 26.5 GHz – 40 GHz, K-female
$9,193.00$9,677.00
